Setting Work Offsets in Fusion 360. Source
| G# | Fusion Offset # |
| G54 | 0,1 |
| G55 | 2 |
| G56 | 3 |
| G57 | 4 |
| G58 | 5 |
| G59 | 6 |
| G154 P1 | 7 |
| G154 P2 | 8 |
| G154 P3 | 9 |
So after WCS 7 (G154 P1), For G154 P(X) enter (X+6) in Fusion setup post process tab
Setting Work Offsets in Fusion 360 (WCS) Print
Modified on: Tue, 4 Oct, 2022 at 8:14 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.