Our ShopSabre Drop-In Pedestal kits allow you to directly replace the number of tools you have now without needing modifications. 


But yes, if you have 5-tools already, you can add 5 more tools with that original spacing on any PRO or IS ShopSabre model (since 2017*). Keep in mind, you'll have to do about as much work and modification to add the maximum amount of tools for your machine as to add any more than what you have now.


If you don't have a slot or mounting holes already made in your bed for the additional tools you'll need to remove all hardware and machine that slot and new mounting holes.


This is basically the same but less flexible version of our standard Modular ATC Pedestals.


Note that even with our Drop-in Kits you should always confirm each tool position matches position and calibrate as needed so as to not damage your machine with any slight deviation that is common between ATC rack changes.



* There's a good chance older machines can as well but please contact us to confirm with you.