We designed the first version of our Dust Boot to work with HSD spindles like the ones that ShopSabre machines offer. The mounting point of the Boot fits around the 100mm diameter “nose” just above the gauge line.
There’s a good chance it will work with more machines but we have yet to confirm other models at this time.
Below is a diagram showing the fit of the Dust Boot in a plan view. The mounting hole can tighten down about 2-3mm to fit a slightly smaller spindle or possibly 3mm larger. You need to have clear or avoid the red area which is the Dust Boot port.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article