Dust Boot
FAQ's for Portland CNC's Spindle Mounted Dust Boot https://portlandcnc.com/shop/dust-boot
Here's a list of what CNC Machines are compatible, incompatible, or untested yet. We are always looking for more testers through our Test-Fit Guarantee ...
Thu, 18 Apr, 2024 at 11:21 AM
Machine Fit and Compatibility Our initial offering of Laguna Dust Boots will support most: ✅ SmartShop II with ES951 spindles - pneumatic lifting mech...
Tue, 2 Jan, 2024 at 1:38 PM
We have only tested out our Dust Boot with a few machines so far. We're pretty sure it works with more than just ShopSabre CNC Routers but need teste...
Tue, 17 Jan, 2023 at 9:32 AM
In comparing the PDX CNC Dust Boot against the Dust Dock, several key features come into play. While we don't have direct experience with the Dust Dock,...
Thu, 14 Mar, 2024 at 12:14 AM
We designed the first version of our Dust Boot to work with HSD spindles like the ones that ShopSabre machines offer. The mounting point of the Boot fits ar...
Thu, 14 Mar, 2024 at 12:16 AM
Yes, on many machines this is no problem. If you have a stock ShopSabre PRO or IS machine with an HSD spindle, and the newer ATC-Pedestal-like rack you ...
Thu, 14 Mar, 2024 at 12:18 AM
Yes, of course. For one, you'll never clean out a compression cut in one pass fully - well maybe if you had the best dust collector ever made. With any ...
Wed, 18 Jan, 2023 at 11:30 PM
Most toolholders should work insomuch it fits within the bounds of the lower brush with about .75-1 inch to spare. Maximum Tool Diameter The max...
Wed, 12 Apr, 2023 at 3:02 PM
Size Matters The size of your duct or hose plays a dramatic role in the performance of your dust collection. The chart below shows the theoretically possib...
Thu, 15 Dec, 2022 at 10:00 AM
Currently, we don't have plans to make a 4-inch Dust Boot. Our version with a 5-inch port is a big reason of why it performs well (more CFM). Red...
Thu, 7 Dec, 2023 at 11:48 AM