Will you make a 4-inch or 6-inch Dust Boot? : Portland CNC

Will you make a 4-inch or 6-inch Dust Boot? Print

Modified on: Thu, 7 Dec, 2023 at 11:48 AM

Currently, we don't have plans to make a 4-inch Dust Boot. Our version with a 5-inch port is a big reason of why it performs well (more CFM).

Reducer Kit

We do offer a 5-to-4" Reducer Kit as an option under "Port". This includes everything you'd need to hook up our Dust Boot to your 4-inch ducting.

✨IF YOU CAN✨ make a 5-inch work, we highly recommend that as you'll definitely see less performance than what you see in our videos since you'll be losing quite a bit of CFM.

We estimate about a 22% improvement in CFM with our 4" Kit versus the stock boot whereas our 5-inch Port is an ~89% improvement.

6-inch Version

We won't say never but currently, we don't have plans for a 6-inch option either. We've tested it and the 5-inch is pretty ideal for most cases. The biggest issue with more volume is the brush doesn't withstand the airflow and sucks in.

Did you find it helpful? Yes No

Will you make a 4-inch or 6-inch Dust Boot? Print

Reducer Kit

6-inch Version

Related Articles