If you've broken your Dust Boot, here's how to replace the red port.
You'll need:
- Phillips #1 Screwdriver
- Hot Glue Gun for 1/2" glue sticks - suggested low-cost option.
- Something to scrape hot glue off HDPE mount plate.
Replace Red Port
Note how we glued the port to the mounting HDPE top plate (black).
Remove 3ct - #1 Phillips Screws
Remove the original red part.
Scrape off the original glue.
Replicate how we glued the red part using the provided hot glue.
Attach 3ct - #1 Phillips screws.
Let sit for 30 minutes to harden.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article